loadsol and loadpad support

Find answers to your questions on how to utilize loadsol and loadpad.

Set up your loadsol with loadapp and loadsol-s

Before you can start the measurement, you need to connect your sensors to the loadapp and loadsol-s application.

novel gmbh app store

Download data from loadsol pro

You can download the data from loadsol pro after each measurement via bluetooth or all at once via USB.


This is how:

  1. connect sensors via USB cable with your PC
  2. launch loaddesktop transfer software
  3. click “scan” and select the sensors
  4. press “download” and select the directory.
accuarate force measurement under foot

Create ASCII data for the loadsol

Access the ascii data from the loadsol-s app from previously collected data:

mobile force measurement insdie shoe - Loadapp
  1. Open the loadsol-s app.
  2. Go to Files and open the previously collected trial.
  3. Tap the “ASCII” button labeled “N” in the picture below.
  4. Connect them mobile device via USB to the computer to access the data

(NOTE: iOS users must use MAC OS, iTunes, or a 3rd party software to access files on an iOS device.)

Automatically save ASCII data in loadsol-s app

Automatically save ascii data and upload to the Cloud within the loadsol-s app:

  1. Open the loadsol-s app.
  2. Tap on Settings.
  3. Go to Auto Save and ensure with ASCII is enabled.
  4. Go to Auto upload and ensure the cloud service you want to use is enabled. If this is the first time using Google Drive and authentication process will occur providing loadsol-s app with access to your Google Drive. If using iCloud, the iCloud account associated with the device will be used. Please note that internet access is required at the time which you are saving data. Also, ascii data is only uploaded to the cloud at the time of collection, not if saved manually later – see article “Accessing ascii data from previously collected loadsol data”.
mobile force measurement - loadsol insole - application setting

What is the password to save the calibration on the loadsols?

The password is 7007.  It is not required to click save, as the calibration is saved for that particular data collection session.  As soon as the insoles disconnect it will revert back to the previous saved calibration.  Saving is useful if you have the same subject/footwear using the insoles for multiple days.